LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Electronic Control Modules (Service Information)) >> MODULE, Transmission Control >> Standard Procedure >> Drive Learn - RFE Transmissions >> Learn A Smooth 4-3 COASTDOWN And Part Throttle 4-3 KICKDOWN

Learn A Smooth 4-3 COASTDOWN And Part Throttle 4-3 KICKDOWN

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The transmission oil temperature must be above 110°F (43°C).

Use the following steps to have the TCM learn the UD shift volume.

  1. At a vehicle speed between 64-97 km/h (40-60 MPH), perform repeated 4-3 kickdown shifts.
  2. Repeat until the UD volume becomes somewhat stable and the shift becomes smooth. Refer to  1.