LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Radio Frequency (RF Hub) Module - Electrical Diagnostics - 1500) >> Diagnosis And Testing >> B1A7D-2A-Start Button - Stuck >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

If the (D122) Security K Line Communication circuit and the (G20) Ignition Switch Position Signal circuit match, during a button press, but are On for longer than 25 seconds, this code will set.