LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (3.6L - DTCS P1457 To P2311 - 1500) >> Diagnosis And Testing >> P2127-Accelerator Pedal Position Sensor 2 Circuit Low >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
POSSIBLE CAUSES 
5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
APP SIGNAL 2 CIRCUIT SHORTED TO GROUND
5-VOLT SUPPLY CIRCUIT SHORTED TO SENSOR GROUND CIRCUIT
5-VOLT SUPPLY CIRCUIT SHORTED TO SENSOR GROUND CIRCUIT
APP SIGNAL 2 CIRCUIT SHORTED TO SENSOR GROUND CIRCUIT
APP SIGNAL 2 CIRCUIT SHORTED TO SENSOR GROUND CIRCUIT
5-VOLT SUPPLY CIRCUIT OPEN OR HIGH RESISTANCE
APP SIGNAL 2 CIRCUIT OPEN OR HIGH RESISTANCE
ACCELERATOR PEDAL POSITION SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  STANDARD PROCEDURE  .