LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (3.6L - DTCS P1457 To P2311 - 1500) >> Diagnosis And Testing >> P1495-Left Front SEATBELT Switch Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) receives a message over the CAN BUS from the Occupant Restraint Controller (ORC) that there is a fault with the left front seat belt switch assembly. One trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals