LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (3.6L - DTCS P0572 To P1456 - 1500) >> Diagnosis And Testing >> P1205-Fuel Pump Control Module Internal Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Fuel Pump Control Module (FPCM) loses the ability to detect short circuits, output state, overvoltage, and thermal runaway. Sets the MIL after failure matures for 60 seconds. When this DTC is set, The FPCM will continue to run the Fuel Pump Module in the normal mode at the duty cycle commanded by the PCM. This is an internal FPCM fault.