LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (3.6L - DTCS B1810 To P018C - 1500) >> Diagnosis And Testing >> P0016-Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1 >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Powertrain Control Module (PCM) detects an error when the Camshaft position is out of phase with the Crankshaft position. One Trip Fault. Three good trips to turn off the MIL. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals