LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Body Control Module (BCM) - DTCS B1815-11 To U1433-24 - 1500) >> Diagnosis And Testing >> U1433-23-Implausible Ignition Switch Status Message Received - Signal Stuck Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The BCM detects that the hardwired ignition switch input voltage from the RF Hub module indicates that the ignition switch is in the off position, but the CAN bus message indicates that the ignition switch is the run position for more than 10 seconds.

scientia non olet · About LEMON Manuals