LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Body Control Module (BCM) - DTCS B1815-11 To U1433-24 - 1500) >> Diagnosis And Testing >> B1E72-11-Power Inverter Enable Control - Circuit Short To Ground >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Once the 115 Volt A/C Power Outlet switch is pressed, a network communication message is sent to the Body Control Module (BCM) to enable the Power Inverter Module. The BCM provides a voltage output to enable the Power Inverter Module. Once the Power Inverter Module is functional, it sends a signal to the BCM indicating that it is ready to function. The BCM then sends out a network communication message requesting illumination of the status indicator on the 115 Volt AC Outlet switch.

scientia non olet · About LEMON Manuals