LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Steering System) >> Linkage, Independent Front Suspension >> END, Tie Rod >> Diagnosis and Testing >> Diagnosis And Testing - Tie Rod >> Inner Tie Rod

Inner Tie Rod

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Inner Tie Rod Free-play
GC0082934Courtesy of CHRYSLER LLC
  1. Grasp the inner tie rod near the steering gear bellows and attempt to move the tie rod straight up and down. If any free-play is felt, replace the inner tie rod end. Refer to END, Tie Rod , Removal END, Tie Rod, Link and Coil , Removal .
  2. If no free-play is felt, install the front wheels. Refer to Wheels , Standard Procedure .
  3. Remove support and lower the vehicle.
scientia non olet · About LEMON Manuals