LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Steering System) >> Column >> SHROUD, Steering Column >> Installation >> Upper

SHROUD, Steering Column: Installation: Upper

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Column Shroud
GC0088328Courtesy of CHRYSLER LLC
NOTE:

If the vehicle is equipped with an automatic transmission, be certain to engage the gearshift lever boot into the opening in both shroud halves.

  1. Position the upper shroud (1) onto the steering column over the lower shroud (4).
  2. Align the snaps features on the upper and lower shroud halves and apply hand pressure to snap together.
  3. From below the steering column, install the two outboard screws within the recess areas (2) that secure the upper shroud (1) to the lower shroud (4).
scientia non olet · About LEMON Manuals