Sensor, Variable Line Pressure: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Input, Output, & Line Pressure Sensors

Courtesy of CHRYSLER GROUP, LLC

1 - OUTPUT SPEED SENSOR

2 - LINE PRESSURE SENSOR

3 - INPUT SPEED SENSOR

Raise vehicle.
Place a suitable fluid catch pan under the transmission.
Remove the wiring connector from the line pressure sensor (2).
Remove the bolt holding the line pressure sensor (2) to the transmission case.
Remove the line pressure sensor (2) from the transmission case.