Section 292 (Half Shaft - 1500): Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Half Shaft Nut

Courtesy of CHRYSLER GROUP, LLC

With vehicle in neutral, position vehicle on hoist.
Remove half shaft nut (1) from shaft (2).

Fig 2: Steering Knuckle, Lower Control Arm, Shock & Spring
Courtesy of CHRYSLER GROUP, LLC
Remove brake caliper and rotor.
Remove steering knuckle (1).

Fig 3: Half Shaft
Courtesy of CHRYSLER GROUP, LLC
Disengage inner C/V joint (1) from axle shaft with two pry bars between the C/V housing and axle housing.
Remove half shaft from vehicle.