LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Frame And Bumpers - 1500) >> Bumpers >> Bumper, Rear >> Installation >> Installation

Bumper, Rear: Installation: Installation

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Bumper, Trailer Hitch & Bolts
GC0088223Courtesy of CHRYSLER GROUP, LLC
  1. Position the bumper (1) onto the vehicle and line up the pins on the sides.
  2. Install the bolts (3 and 4).
  3. Tighten the bolts (3) to 54 N.m (40 ft. lbs.).
  4. Tighten the bolts (4) to 54 N.m (40 ft. lbs.).
    Fig 2: Rear Bumper Electrical Connectors
    GC0088222Courtesy of CHRYSLER GROUP, LLC
  5. Connect the electrical connectors (2).
scientia non olet · About LEMON Manuals