Sensor, Oil Temperature: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lower Intake Manifold & Bolts

Courtesy of CHRYSLER GROUP, LLC

Release fuel system pressure. Refer to FUEL DELIVERY, GAS, STANDARD PROCEDURE .
Disconnect and isolate the negative battery cable.
Remove the air inlet hose, upper intake manifold and lower intake manifold with the fuel injectors and fuel rail (2). Refer to MANIFOLD, INTAKE, REMOVAL .

Fig 2: Oil Temperature Sensor Electrical Connector, Oil Pressure Sensor Electrical Connector, Oil Filter Housing, Heater Hose & Bolts
Courtesy of CHRYSLER GROUP, LLC
Disconnect the oil temperature sensor electrical connector (5).

Fig 3: Oil Temperature Sensor, Oil Pressure Sensor & Oil Filter Housing
Courtesy of CHRYSLER GROUP, LLC
Remove the oil temperature sensor (1) from the oil filter housing (3).