LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Accessory Drive >> TENSIONER, Belt >> Removal >> 3.6L

TENSIONER, Belt: Removal: 3.6L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Because of high spring pressure, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly.

Fig 1: Identifying Drive Belt(3.6L Engine)
GC0154511Courtesy of CHRYSLER GROUP, LLC
  1. Remove main drive belt (1). Refer to BELT, SERPENTINE, REMOVAL .
  2. Remove the mounting bolt holding the belt tensioner (6).
scientia non olet · About LEMON Manuals