LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Accessory Drive >> Belt, Serpentine >> Removal >> 4.7L

Belt, Serpentine: Removal: 4.7L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt (4.7L Engine)
GC0087412Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Do not let tensioner arm snap back to the freearm position, severe damage may occur to the tensioner.

  1. Disconnect negative battery cable from battery.
  2. Rotate belt tensioner until it contacts it's stop. Remove belt, then slowly rotate the tensioner (7) into the freearm position.
scientia non olet · About LEMON Manuals