Sensor, Air Temperature, Intake: Installation: 4.7L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: IAT Sensor Tab/O-Ring

Courtesy of CHRYSLER GROUP, LLC

1 - IAT SENSOR

2 - SENSOR O-RING

3 - RELEASE TAB

Check condition of sensor o-ring (2).
Clean sensor mounting hole.
Position sensor (1) into base and rotate clockwise until past release tab (3).

Fig 2: IAT Sensor - 4.7L
Courtesy of CHRYSLER GROUP, LLC
Install electrical connector (2).