LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Ignition System (Service Information) 1500) >> Coil, Ignition >> Removal >> 5.7L

Coil, Ignition: Removal: 5.7L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Coil, Connector & Mounting Bolts
GC0082813Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the electrical connector (1) from coil (3).
  2. Clean area at base of coil with compressed air before removal.
  3. Remove two mounting bolts (2) (note that mounting bolts are retained to coil).
    Fig 2: Removing/Installing Ignition Coil
    GC0080076Courtesy of CHRYSLER GROUP, LLC
  4. Carefully pull up coil (1) from valve cover.
  5. Remove coil (1) from vehicle.
scientia non olet · About LEMON Manuals