LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Power Locks (Service Information) 1500) >> Diagnosis And Testing >> Diagnosis And Testing - Power Locks >> Preliminary Diagnosis

Preliminary Diagnosis

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

As a preliminary diagnosis for the power lock system, note the system operation while you actuate both the Lock and Unlock functions with the power lock switches and with the Remote Keyless Entry (RKE) transmitter (also known as the FOB with Integrated Key/FOBIK). Then, proceed as follows:

  1. If the entire power lock system fails to function with either the power lock switches or the FOBIK, check the fused B(+) fuse for the power lock system in the PDC.
  2. If the power lock system functions with both power lock switches, but not with the FOBIK, proceed to diagnosis of the Remote Keyless Entry (RKE) system. Refer to DIAGNOSIS AND TESTING .
  3. If the power lock system functions with the FOBIK, but not with one or both power lock switches, proceed to diagnosis of the door lock switches. Refer to DIAGNOSIS AND TESTING .
  4. If only one power lock motor fails to operate with both power lock switches and the RKE transmitter, proceed to diagnosis of the power lock motor. Refer to MOTOR, DOOR LOCK .