LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Body - Interior & Exterior - 1500) >> Seats >> Seat Back, Rear >> Assembly >> Assembly >> Center Arm Rest

Center Arm Rest

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Armrest Foam & Cover
GC0089124Courtesy of CHRYSLER GROUP, LLC
  1. Position the foam and cover (2) over the armrest frame and secure the zipper (1).
    Fig 2: Cup Holder
    GC0089123Courtesy of CHRYSLER GROUP, LLC
  2. Position the cupholder (2) onto the armrest (3) and seat the four clips (1) fully.
    Fig 3: Armrest
    GC0089122Courtesy of CHRYSLER GROUP, LLC
  3. Install the armrest assembly (1) onto the tray (3) and install the pivot brackets.
  4. Install the pivot bolts and tighten to 28 N.m (21 ft. lbs.).
scientia non olet · About LEMON Manuals