LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Body - Interior & Exterior - 1500) >> Interior >> Panel, A-Pillar Trim, With Grab Handle >> Removal >> Removal

Panel, A-Pillar Trim, With Grab Handle: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing A-Pillar Trim/Grab Handle
GC0083754Courtesy of CHRYSLER GROUP, LLC
  1. Using a small flat-bladed tool, carefully open the two fastener covers (3) located in the a-pillar trim panel (2).
  2. Remove the two bolts (4) that secure the a-pillar trim panel to the a-pillar (1) and remove the trim panel.
scientia non olet · About LEMON Manuals