Section 241 (Audio/Video/Entertainment/Connectivity (Service Information) 1500): Radio: Operation: Operation

The Radio Receiver Module (RRM) becomes operational when it receives a wake up signal over the Controller Area Network - Interior High Speed (CAN-HIS) data bus indicating the status of the ignition switch is On or Accessory. For further information on the operation of the vehicles radio/media system in the vehicle, see the heading for the appropriate audio system option in the User Guide or the Owner Manual. See the Uconnect web site (http://www.driveuconnect.com/) for more information, or refer to the Owner's link on the vehicle brand web site (http://ramtrucks.com/en/) for copies of those publications.

The RRM uses a fender mounted antenna for AM/FM signal reception and, depending upon vehicle optional equipment, a roof mounted combination antenna that can receive Global Positioning System (GPS), satellite radio and cellular telephone signals. (For embedded cell only)

Depending upon the audio system options, a RRM can play music from many different media sources. The media can be played by connecting the source to the audio system via a 3.5 millimeter auxiliary (AUX) port, a Universal Serial Bus (USB) port, a remote Secure Data (SD) card slot, a external Compact Disc (CD) player or through wireless bluetooth streaming, refer to the Uconnect web site (http://www.driveuconnect.com/) for compatibility.