Pick Up Models
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| 1 | EGR Temperature Sensor |
| 2 | Sensor Harness Connector |
| 3 | Crossover Tube |
| 4 | EGR Actuator |
| 5 | EGR Actuator Harness Connector |
| 6 | EGR Tube |
- Clean EGR crossover tube at sensor mounting point.
- Check condition of the sensors metal gasket and replace if necessary.
- Install EGR temperature sensor (1) to EGR tube (6). Tighten to 18 N.m (159 in. lbs.) .
- Connect EGR temperature sensor (1) harness connector (2).