LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Emissions Control) >> Evaporative Emissions >> VALVE, Positive Crankcase Ventilation (PCV), 5.7L >> Installation >> Installation

VALVE, Positive Crankcase Ventilation (PCV), 5.7L: Installation: Installation

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean out intake manifold opening.
  2. Check condition of two o-rings on PCV valve.
  3. Apply engine oil to two o-rings.
  4. Place PCV valve into intake manifold and rotate 90 degrees clockwise for installation.
scientia non olet · About LEMON Manuals