LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (DTCS P1D94 To U1479 - 8HP70 Automatic Transmission - 1500) >> Diagnosis And Testing >> P1DAD-Input Shaft/Output Shaft Direction Correlation >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The failure is detected if the measured directions of input speed and output speed signal do not correspond to the calculated driving direction for a calibrated amount of time.

Calculated Driving Direction is Forward 

A failure is detected if input speed and output speed direction are different.

Calculated Driving Direction is Reverse 

A failure is detected if input speed and output speed direction are the same.

scientia non olet · About LEMON Manuals