LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (DTCS P0219 To P1D93 - 8HP70 Automatic Transmission - 1500) >> Diagnosis And Testing >> P1D20-Multi Module Handshake Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

A failure is detected if the number of commanded ESM resets are greater than a calibrated threshold. The fault that's stored corresponds to the reason of the last commanded reset.

scientia non olet · About LEMON Manuals