LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (DTCS P0219 To P1D93 - 8HP45 Automatic Transmission - 1500) >> Diagnosis And Testing >> P0721-Output Speed Sensor Circuit Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The failure is detected if the difference between the output speed measured by the TCM and the following signals are both greater than a threshold for a calibrated amount of time. When the calculated output speed from the wheel speed signal from CAN or the calculated output speed from the output speed measured by the TCM.