LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (DTCS P0219 To P1D93 - 8HP45 Automatic Transmission - 1500) >> Diagnosis And Testing >> P062F-Internal Control Module EEPROM Error >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK IF TCM IS PROGRAMMABLE 
    1. With the scan tool, record the vehicles controller part number.
    2. Select Use Controller Part Number under the Flash Tab.
    3. Flash the TCM with the latest software.

      Were you able to program (flash) the TCM successfully?

      Yes 

      • Test Complete.
      • Perform the TRANSMISSION VERIFICATION TEST. Refer to STANDARD PROCEDURE .

      No 

      • Using the schematics as a guide, check the Transmission Control Module A (TCMA) connector terminals for corrosion, damage or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace and program the TCMA in accordance with the Service Information. Refer to VALVE BODY, REMOVAL .
      • Perform the TRANSMISSION VERIFICATION TEST. Refer to STANDARD PROCEDURE .