Diagnostic Test

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

VIDEO SCREEN MODULE HIGH TEMPERATURE
1. Turn the ignition on.
2. With the scan tool, clear all VES DTCs.
3. Turn the VES on.
4. With the scan tool, read the DTC information.
  Does the scan tool read: B142B-VES UNIT HIGH TEMPERATURE?
  
  Yes
  - Turn the Video Screen Module off and allow the unit to cool.
  - Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
  No
  - Test Complete.