LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (6.7L - DTCS P21C4 To U1601 - 3500 Cab & Chassis) >> Diagnosis And Testing >> P24A0-Closed Loop DPF Regeneration Control At Limit - Temperature Too Low >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) will set this fault if it detects that the DOC/DPF Catalyst closed loop control fueling adjustment has reached it's maximum allowable fueling but is unable to reach the target regeneration temperature.

scientia non olet · About LEMON Manuals