LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (6.7L - DTCS P21C4 To U1601 - 3500 Cab & Chassis) >> Diagnosis And Testing >> P249F-Excessive Time To Enter Closed Loop DPF Regeneration Control >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

If the time duration after an active soot regeneration is requested exceeds a calibrated threshold and the Diesel Oxidation Catalyst inlet temperature has not reached the lightoff temperature threshold to begin closed loop control.

scientia non olet · About LEMON Manuals