LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (6.7L Engine (Service Information)) >> Engine Mounting >> INSULATOR, Engine Mount, Rear >> Removal >> G 56 Manual

G 56 Manual

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Transmission Mount & Bolts (M/T)
GC0137142Courtesy of CHRYSLER LLC
CAUTION:

If replacing a engine mount/bracket, be certain to inspect all other engine mounts/brackets in the system. Failure to follow this caution may result in damage to the vehicle.

  1. Raise the vehicle on a hoist.
  2. Position transmission jack in place.
  3. Remove nuts securing transmission mount to crossmember.
  4. Raise the transmission.
  5. Remove bolts (1) and the rear transmission mount (2).
scientia non olet · About LEMON Manuals