Cylinder Head Cover Gasket
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - INJECTOR NUTS |
| 2 - GASKET |
| 3 - INJECTOR HARNESS CONNECTORS |
- Clean off any oil from cylinder head cover gasket
- Inspect cylinder head cover gasket for cuts or damage. Replace if damaged.
- Install cylinder head cover gasket (2).
- Install injector solenoid nuts (1) at injectors. Tighten to 1.25 N.m (11 in. lbs.).
- Connect injector harness connectors (3) at cylinder head cover gasket.