LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (6.7L - DTCS P0008 To P040D - 3500 Cab & Chassis) >> Diagnosis And Testing >> P0088-Fuel Rail Pressure Too High >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) will turn on the MIL lamp immediately after the diagnostic runs and fails. During this time the ETC lamp will also illuminate. The PCM will turn off the MIL lamp after the diagnostic runs and passes in four consecutive drive cycles.

scientia non olet · About LEMON Manuals