If a PM/MK, 2.2L Controller was replaced, navigate to "Misc. Functions" and perform all applicable routines:
WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The available routines may vary depending on model and year of vehicle.
- PCM/ECM Replaced - Located within the Security Module
- Engine ECU ReplacementNOTE:
If the PCM/ECM data transfer is able to be completed, it may not be necessary to perform routines 5 through 10.
- Injector Quantity Adjustment
- Program Variant Code
- Swirl Control Learn
- Throttle Valve Learn
- VGT Learn
- MAF Sensor Replace
- O2 Sensor Replace
- Used DPF initialize