LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (6.7L - DTCS P2267 To U1601 - 2500 & 3500) >> Diagnosis And Testing >> P24A0-Closed Loop DPF Regeneration Control At Limit - Temperature Too Low >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) will set this fault if it detects that the Diesel Particulate Filter closed loop control fueling adjustment has reached it's maximum allowable fueling but is unable to reach the target regeneration temperature.

scientia non olet · About LEMON Manuals