LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (6.7L - DTCS P0008 To P026A - 2500 & 3500) >> Diagnosis And Testing >> P0016-Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1 >> When Monitored:

When Monitored:

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

While engine is running. The Powertrain Control Module (PCM) monitors the position of the notch on the crankshaft speed sensor target and the camshaft speed sensor target. If the two positions do not match, the PCM then determines that there is a mechanical mis-alignment between the two sensors.

scientia non olet · About LEMON Manuals