LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 68RFE Automatic Transmission)) >> DTC Troubleshooting >> P0876-UD Pressure Switch Rationality >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is set if the UD pressure switch is in the wrong state for the current gear. For example, this code would be set if the UD pressure switch remained off while the transmission was in second gear.