LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Front Suspension & Wheel Alignment) >> Front, Link and Coil >> SPRING, Front Coil >> Removal >> Removal

SPRING, Front Coil: Removal: Removal

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Position a hydraulic jack under the axle to support it.
  2. Paint or scribe alignment marks on lower suspension arm cam adjusters and axle bracket for installation reference.
  3. Remove the upper suspension arm and loosen lower suspension arm bolts.
  4. Mark and disconnect the front propeller shaft from the axle 4x4 models.
  5. Disconnect the track bar from the frame rail bracket.
  6. Disconnect the drag link from pitman arm.
  7. Disconnect the stabilizer bar link and shock absorber from the axle.
  8. Lower the axle until the spring is free from the upper mount. Remove the coil spring.
scientia non olet · About LEMON Manuals