LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (3.7L/4.7L/5.7L - DTCS P0506 To P0850 - NGC - 1500 & 2500) >> Diagnosis And Testing >> P0703-Brake Switch 2 Performance >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

When the Powertrain Control Module (PCM) recognizes Brake Switch No. 2 voltage is not equal to the applied value at the PCM when Brake Switch No. 1 is applied. This could be a normal condition. If this condition is seen repeatedly by the PCM the fault is set. Cruise will not work for the rest of the key cycle.

scientia non olet · About LEMON Manuals