Diagnostic Test

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR SEAT POSITION SENSOR AND CIRCUIT PERFORMANCE DIAGNOSTIC TROUBLE CODES (DTC's)
1. Turn the ignition on.
2. Using a scan tool, read DTC's.
  Does the scan tool display any seat position sensor or circuit performance DTC's?
  
  Yes
  - Diagnose and repair all seat position sensor and circuit performance DTC's. Refer to DIAGNOSIS AND TESTING .
  No
  - Go To 2.
TEST FOR INTERMITTENT CONDITION
1. Using a scan tool, record and erase DTC's.
2. Move the seat switch in the full forward horizontal adjust position.
3. Using a scan tool, read DTC's.
  Does the scan tool display DTC B1D9B-SEAT HORIZONTAL FRONT STOP NOT LEARNED?
  
  Yes
  - Using a scan tool, perform the MSM Standard Routine.
  - Perform POWER SEAT SYSTEM VERIFICATION TEST. Refer to POWER SEAT SYSTEM VERIFICATION TEST .
  No
  - The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
  - Perform POWER SEAT SYSTEM VERIFICATION TEST. Refer to POWER SEAT SYSTEM VERIFICATION TEST .