LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Final Drive Control Module (FDCM) - Electrical Diagnostics) >> DTC Troubleshooting >> C2311-Stabilizer/Differential Indicator Supply Circuit High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
DISCONNECTING STABILIZER SWITCH
(T536) SWITCH SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE
T536) SWITCH SUPPLY CIRCUIT FOR AN OPEN
(T532, T533 or T534) LOCKER ILLUMINATION SENSE CIRCUIT FOR A SHORT TO VOLTAGE
(T532, T533 or T534) LOCKER ILLUMINATION SENSE CIRCUIT FOR AN OPEN
FDCM
scientia non olet · About LEMON Manuals