LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 ((Antilock Brake System (Abs) - Electrical Diagnostics - 1500, 2500 & 3500)) >> DTC Troubleshooting >> C1073-Abs Motor Control Circuit >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

OPEN CIRCUIT: If pump motor feedback remains greater than 0.75 of a volt for more than 50 msec (+/- 5 msec) after monitoring conditions are met, the DTC will set.

LOCKED MOTOR: If the module detects that the motor is spinning at less than 500 RPM. after monitoring conditions are met, the DTC will set.

LOW VOLTAGE: The voltage of the supply is monitored every 3 msec. If the voltage is low for 150 msec, the DTC will set.