Diagnostic Test
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- VERIFY ACTIVE ORC DTC NOTE:
Ensure the battery is fully charged.
- Turn the ignition on.
- With the scan tool, read ORC DTCs.
Does the scan tool display an active U1415-00-IMPLAUSIBLE/MISSING VEHICLE CONFIGURATION DATA - DTC?
Yes
- Go To 2.
No
- Repair complete.
- Refer to STANDARD PROCEDURE and perform the RESTRAINTS SYSTEM VERIFICATION TEST.
- VERIFY ACTIVE TIPM DTC
- With the scan tool, read TIPM DTCs.
Does the scan tool display any active TIPM DTCs?
Yes
- Refer to DIAGNOSIS AND TESTING and perform the appropriate TIPM diagnostic procedures.
No
- Replace the Totally Integrated Power Module (TIPM) in accordance with Service Information.
- Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.
- With the scan tool, read TIPM DTCs.