LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (As68RC Automatic Transmission (Service Information)) >> Fluid >> Standard Procedure >> Transmission Fill

Transmission Fill

WARNING: This page is about a different car, the 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:

  1. Remove dipstick and insert clean funnel in transmission fill tube.
  2. Add following initial quantity of Mopar® AS68RC ATF to transmission:
    1. If only fluid and filter were changed, add 6.8L (7.2 quarts)  of AS68RC to transmission.
    2. If transmission was completely overhauled and the torque converter was replaced or drained, add 13L (13.75 quarts)  of Mopar® AS68RC ATF to transmission.
  3. Check the transmission fluid and adjust as required.
scientia non olet · About LEMON Manuals