LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (As68RC Automatic Transmission (Service Information)) >> Diagnosis And Testing >> Converter Housing Fluid Leak >> Torque Converter Leak Points

Torque Converter Leak Points

WARNING: This page is about a different car, the 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cut Away View Of Torque Converter
GC0109725Courtesy of CHRYSLER GROUP, LLC
1 - LOCK - UP DAMPER 5 - TURBINE RUNNER
2 - CONVERTER FRONT COVER 6 - STATOR
3 - LOCK - UP PISTON 7 - ONE - WAY CLUTCH
4 - PUMP IMPELLER  

Possible sources of converter leaks are:

  1. Leaks at the weld joint around the outside diameter weld.
  2. Leaks at the converter hub weld.

In most cases, a torque converter which is wet from transmission fluid indicates a leak at one of these areas.