Sensor, Air Temperature, Intake: Removal: 4.7L
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER GROUP, LLC
The intake manifold air temperature (IAT) sensor (1) is located near the throttle body.
- Disconnect electrical connector (2) from IAT sensor.
Courtesy of CHRYSLER GROUP, LLC
| 1 - IAT SENSOR |
| 2 - SENSOR O-RING |
| 3 - RELEASE TAB |
- Clean dirt from sensor base.
- Gently lift on small plastic release tab (3) and rotate sensor about 1/4 turn counter-clockwise for removal.
- Check condition of sensor o-ring (2).