Sensor, Air Temperature, Intake: Installation: 3.7L

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: IAT Sensor Tab/O-Ring

Courtesy of CHRYSLER GROUP, LLC

1 - IAT SENSOR

2 - SENSOR O-RING

3 - RELEASE TAB

Check condition of sensor o-ring (2).

Fig 2: IAT Sensor - 3.7L
Courtesy of CHRYSLER GROUP, LLC
Clean sensor mounting hole in air intake tube.
Position sensor into air intake tube and rotate clockwise until past release tab.
Install electrical connector (1).