LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Fuel System) >> Fuel Delivery, 6.7L Diesel >> Standard Procedure >> Draining Fuel Tank >> Conventional Procedure

Conventional Procedure

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the fuel supply line quick-connect fitting at the fuel filter. Refer to STANDARD PROCEDURE - QUICK-CONNECT FITTINGS . .
  2. Install the appropriate Fuel Line Adapters / Fitting from the (special tool #8978A, Decay Tool, Fuel). Route the opposite end of this hose to an diesel fuel draining station. Using a scan tool, activate the fuel pump and drain the tank until empty.
scientia non olet · About LEMON Manuals