Motor, Sunroof: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Do not attempt to move or reposition the sunroof glass panel or drive cables with the sunroof motor and module unit removed. Damage to the vehicle, to the sunroof or personal injuries may result.
WARNING:
The sunroof must first be calibrated and the Motor/Module Initialization Procedure must be completed any time a sunroof motor/module is replaced with a new component. Failure to perform this procedure could result in vehicle damage or personal injury.
- Disconnect the battery negative cable.
- Remove the vehicle headliner. Refer to HEADLINER, REMOVAL
.
- Remove the power sunroof motor electrical connector (2).
- Remove the retaining screws (3) and remove the motor (1) from the vehicle.